Car Boot LED Strip with Auto Sensor, Waterproof Boot Light
Fast delivery from our Auckland warehouse
This car boot LED strip turns on the moment you open the trunk and switches off when you close it, so you are not fumbling in the dark at the supermarket carpark or trying to find the gym bag at night. The 12V SMD 5050 LEDs run off the existing boot light circuit, so installation is a 5 minute peel and stick job with no wiring harness or mechanic visit.
How the Automatic Sensor Works
The strip wires into your existing 12V boot light circuit, so the same switch that currently lights your boot also controls this LED strip. Open the boot, the strip lights up. Close the boot, the strip goes off. No extra switches, no apps, no wiring modifications.
- 12V DC power, runs off the existing boot light circuit, no extra wiring
- SMD 5050 LED chips, SMD means surface mount device, the 5050 is the chip size in mm, ultra-bright output across the full strip length
- IP65 waterproof rating, handles rain, snow and car wash splashes
- Peel and stick adhesive backing, no tools or screws needed
- Flexible strip design, bends to fit any boot shape including curved SUV tailgates
Where to Install It
The 12V SMD 5050 LED strip works in any vehicle with a 12V battery. The most common spots are the inside roof of the boot, the side panels, or along the boot lip. For SUVs and hatchbacks, the strip also works along the tailgate interior for an ambient glow when the back door is open.
- Sedan boots, run along the boot lid or side panels for full illumination
- SUV and hatchback tailgates, mount along the interior of the back door
- Van cargo areas, run along the roof line for workshop-style lighting
- Ute trays and canopies, mount with the included adhesive for after-dark loading
How to Install the LED Strip
Most installations take 5 to 10 minutes. Wipe the mounting surface with rubbing alcohol, let it dry, peel the backing, and stick the strip in place. Then connect the positive and negative wires to your existing boot light terminals.
- Step 1, open the boot and locate the existing 12V boot light wiring
- Step 2, wipe the mounting surface with rubbing alcohol and let it dry for 60 seconds
- Step 3, peel the adhesive backing and press the strip firmly in place for 30 seconds
- Step 4, connect the red wire to positive and the black wire to negative on the boot light circuit
- Step 5, test by opening and closing the boot 3 to 5 times to confirm the sensor triggers
Specifications
What is in the Box
Everything included in this package.
- 1 x Car Seat Hook Organiser
Full details listed below.
- Power input: 12V DC (standard car battery)
- LED type: SMD 5050 chip
- Waterproof rating: IP65 (splash-proof, not submersible)
- Strip length: approximately 1.2m, cuttable at marked intervals
- Installation: adhesive backing, no wiring harness included
- Suitable for: car boots, SUV tailgates, hatchbacks, van cargo areas
Frequently Asked Questions
- How does the automatic sensor activation work?
The strip wires directly into your existing 12V boot light circuit, so the same switch that controls your factory boot light also controls this LED strip-it turns on when you open the boot and off when you close it.
- Is the LED strip waterproof for outdoor use?
Yes, it has an IP65 waterproof rating, which means it handles rain, snow and car wash splashes, though it is not suitable for submersion.
- What vehicles is this boot light compatible with?
The strip works in any vehicle with a 12V battery, including sedans, SUVs, hatchbacks, vans and utes.
- How long is the LED strip and can it be trimmed?
The strip is approximately 1.2 metres long and can be cut at marked intervals if you need a shorter length.
- Do I need any tools or a mechanic to install it?
No tools or screws are needed-just clean the surface with rubbing alcohol, peel and stick the adhesive backing, then connect the red and black wires to your existing boot light terminals.
- How long does installation take?
Most installations take 5 to 10 minutes, and you should test it by opening and closing the boot 3 to 5 times to confirm the sensor triggers correctly.
- Will it fit curved or irregular boot shapes?
Yes, the flexible strip design bends to fit any boot shape, including curved SUV tailgates and irregular panels.
| Weight | 0.5 kg |
|---|---|
| High-concerned chemical | None |
| Voltage | 12 V |
| Item Weight | 0.30kg |
Only logged in customers who have purchased this product may leave a review.
Related products
Reviews
There are no reviews yet.